OSHA 2255 Principles of Ergonomics

Written by

Event Phone: 937-521-1574


infographic of office syndrome ergonomicsThis course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.Credit Awarded: 2.5 CEUs

OSHA 511 Occupational Safety and Health Standards for General Industry

Written by

Event Phone: 937-521-1574


This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

Minimum student contact hours: 26

Prerequisites: None

OSHA 7845: Recordkeeping Rule Seminar

Written by


This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA. Upon course completion students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report. Minimum student contact hours: 4

OSHA 503 Update General Industry Outreach Trainers

Written by


503 general industryThis course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes. Credit Awarded: 1.8 CEUs

Prerequisites: OSHA #501 Trainers Course in Occupational Safety and Health Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.

OSHA 502 Update for Construction Industry Outreach Trainers

Written by

Event Phone: 937-521-1574


 

This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes. Minimum student contact hours: 18

Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.

OSHA 2225 Respiratory Protection

Written by

Event Phone: 937-521-1574


Respiratory ProtectionThis course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.Credit Awarded: 2.5 CEUs

OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

Written by

Event Phone: 937-521-1574


This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.  Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.  Students are briefed on effective instructional approaches and use of visual aids and handouts.  This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.  Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.  Minimum student contact hours: 26

 

Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.  A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.  Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Prior to registration:  Please complete our Prerequisite Verification Form and attach a copy of your OSHA 510 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

STUDENTS: YOU WILL NEED YOUR CFR 1926 OSHA STANDARDS FOR CONSTRUCTION BOOK FOR THIS CLASS.

IF YOU NEED TO PURCHASE ONE PLEASE CALL Samantha @  937-521-1574

THE COST OF THE BOOK IS 30.00 PLUS TAX

OSHA 7200 – Bloodborne Pathogens Exposure Control for Healthcare Facilities

Written by


bloodborne pathogens picThis course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities. Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping. The target audience is the program administrator, manager, or other personnel designated with the responsibility of developing a Bloodborne Pathogens ECP for a healthcare facility. Course highlights include students developing a template for their facility’s ECP. Upon course completion students will have the ability to take a step-by-step approach in developing an ECP for their healthcare facility while utilizing the OSHA Bloodborne Pathogens Standard as a reference. Minimum student contact hours: 7

Prerequisites: None