OSHA 7405 – Fall Hazard Awareness for The Construction Industry

Written by


This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards. Minimum student contact hours: 5

Prerequisites: None

OSHA 501 Trainer Course in Occupational Safety and Health Standards for General Industry

Written by


This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Credit Awarded: 2.6 CEUs

Students will need a copy of the CFR 1920 OSHA standards for General Industry book for this class. Please contact us if you need to purchase a copy.

Prerequisites: Please note you will not be registered for this course until you’ve met the prerequisites: OSHA 511 and five years of general industry safety experience. To have your experience reviewed please login, click the button below to complete the form:

Prior to registration:  Please complete our Prerequisite Verification Forms and attach a copy of your OSHA 511 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

You must be logged in to access the required Prerequisite Verification Forms

OSHA #7505 Introduction to Incident (Accident) Investigation

Written by


Accident InvestigationThis course covers an introduction to basic incident investigation procedures and describes analysis techniques. Course topics include reasons for conducting incident investigations, employer responsibilities related to workplace incident investigations, and a four step incident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting incident and/ or near-miss investigations. Upon course completion students will have the basic skills necessary to conduct an effective incident investigation at the workplace. Minimum student contact hours: 7.5

Prerequisites: None

OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

Written by


This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.  Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.  Students are briefed on effective instructional approaches and use of visual aids and handouts.  This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.  Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.  Minimum student contact hours: 26

Students will need a copy of the CFR 1926 OSHA standards for Construction book for this class. Please contact us if you need to purchase a copy.

Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.  A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.  Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Prior to registration:  Please complete our Prerequisite Verification Forms and attach a copy of your OSHA 510 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

You must be logged in to access the required Prerequisite Verification Forms

OSHA 7105: Evacuation and Emergency Planning

Written by


This course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans. Minimum student contact hours: 4

OSHA 2455 Safety and Health Management Program

Written by

Event Phone: 866-444-4412


This course covers safety and health management responsibilities. Participants will be able to implement a workplace Safety and Health Management Program (SHMP) according to OSHA’s Recommended Practices for Safety and Health Programs and related guidance. The course covers the fundamentals of occupational safety and health management program (SHMP), SHMP recordkeeping requirements, and how to assess workplace safety and health management program. The minimum contact hours for this course is 18 hours.

OSHA 3015: Excavation, Trenching, and Soil Mechanics

Written by


This course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears, and engineering rods. Upon course completion students will have the ability to assess their employer’s compliance with the OSHA Excavation Standard, utilize soil testing methods to classify soil types, determine protective systems for excavation operations, and training requirements. Minimum student contact hours: 20

THIS CLASS REQUIRES PPE: HARD HAT, SAFETY SHOES, SAFETY GLASSES AND SAFETY VEST FOR HANDS ON ACTIVITY

OSHA 7115 Lockout/ Tagout [Controlling Hazardous Energy to Prevent Workplace Injury]

Written by


OSHA 7115 Lock-Out Tag-OutThis course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment. Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control of hazardous energy, developing and implementing energy control programs including written isolation procedures, training of authorized and affected employees, and periodic inspection of energy control procedures using the OSHA Control of Hazardous Energy Standard. Upon course completion the student will have the ability to explain the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy. Minimum student contact hours: 7.5